Although garage doors are a convenient piece of equipment to have, they will show their wear and tear after a while. One of the most common of these issues involves the balancing of your garage door springs. Read on to learn why this is a serious issue and how you can fix it.

Balancing Tips for Garage Door Springs

The garage door springs are usually used to not only lift your door up and down smoothly but also balance it as it moves along the track system. One of the most common problems with springs that homeowners will face is the unbalancing of the door. Fortunately, there is an easy way to fix this issue. Read on to learn a few tips to balance your garage door springs.

Know Which Garage Door Springs You Have

The very first thing you must understand is the type of door springs you have. There are two kinds out on the market today. You have the side-mounted extension springs and torsion springs. Side-mounted extension springs run parallel to the door track while torsion springs are mounted above the door. If you are still unsure, you may seek the advice of a garage door repair Providence company to know for sure what type you have.

Understand the Issue

Next, you must understand your particular issue. Is the garage door difficult to lift? Does it go too fast or too slow? Understanding the issue will help you determine if you need to add or decrease tension on your springs.

Tools Needed for the Job

You’re going to need a couple of things in order to properly do the job. First, collect your safety equipment. This should include gloves, eye protection goggles & a hard hat. Next, you will need a ladder to climb on, C-clamps, and steel rods that can be found within any hardware store.

Adjusting Side-Mounted Garage Door Springs

In order to adjust the tension on your springs, you must utilize steel rods about 18 to 24 inches. Insert these into the holes in the spring and turn until you’ve reached your desired tension.